I-P-200 P-260 P-320 PET Preform Injection Molding System

Incazelo emfushane:

Ukupholisa indawo engaphakathi ye-preform ngaphandle kokusebenzisa umoya ocindezelwe ophezulu , ngokungafani namasistimu amaningi okupholisa angemuva kwesikhunta apholisa kuphela indawo engaphandle.

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Izici

Ukupholisa indawo engaphakathi ye-preform ngaphandle kokusebenzisa umoya ocindezelwe ophezulu , ngokungafani namasistimu amaningi okupholisa angemuva kwesikhunta apholisa kuphela indawo engaphandle.

2.Ukusetshenziswa okuthuthukisiwe komjikelezo - njengoba kufakwe ku- platen ehambayo , isistimu yokupholisa ihlala isebenza phakathi kwama-85% wesikhathi sonke somjikelezo.

3.Amandla esistimu yokubumba umjovo we-PET asuka kumathani angama-230 kuye kwangama-320 ( 2000KN kuya ku-3200KN ), futhi iyatholakala ngobuningi besikhunta se-preform esinezimbotshana ezingama-96.

Imininingwane

INDLELA		I-UNIT	P-200	P-260	P-320
Iyunithi yomjovo	Isikulufa Ububanzi	mm	70	75	80
	Isikulufu L/D Isilinganiso		25	25	25
	Shot Volume	cm3	1016	1378	1689
	Umjovo Wesisindo PET	g	1087	1474	1807
	Izinga lomjovo	g/s	482	496	605
	Ingcindezi Yomjovo	Mpa	105	127	130
	Isivinini seScrew	rpm	110	120	120
Iyunithi Yokubamba	I-Clamping Force	kn	2000	2600	3200
	I-Moving Plate Stroke	mm	490	550	585
	I-Max.Mould Height	mm	540	580	720
	Min.Mould Height	mm	200	200	300
	I-tie Bars Space(W×H)	mm	530×530	580×580	660×760
	Amandla ejector	kn	80	126	180
	I-Ejector Stroke	mm	140	150	180
	Inombolo ye-Ejector	n	5	5	9
Abanye	I-Max.Pump Pressure	Mpa	16	16	16
	Pump Motor Power	kw	30	37	44
	Amandla Okushisa	kw	28	32	37
	(L×W×H)Usayizi	M	6×1.5×1.6	6.8×1.6×1.8	7.7×1.8×2
	Isisindo somshini	T	7	8.5	13