Umshini wokugaya we-MR- U3 Universal
Izici
1. Ukugaya i-HSS kanye ne-carbide engraving cutter kanye nezindebe zomlomo owodwa noma izinqamuli zezindebe eziningi ezinokwakheka okuhlukahlukene njengabasiki be-radiuses noma i-taper angle engalungile yabasiki.
2. Inhloko yenkomba yendawo yonke ihlinzekwa ezindaweni ezingama-24 ukuze kutholakale noma iyiphi i-engeli ethile yomumo, ukuzungezisa kwamahhala okungu-360 noma okungu-100 kuvunyelwe ukugaya i-End Mills, i-Twist Drill, Amathuluzi we-Lathe, esikhundleni kuphela sokunamathiselwe ekhanda lenkomba ngaphandle kokusethwa okuyinkimbinkimbi.
Imininingwane
| Imodeli | MR-U3 |
| Ubukhulu. umthamo we-collet | Φ18 mm |
| Ubukhulu. ukugaya dia. | Φ18 mm |
| I-traver ye-longitudinal ye-index head carrier | 140mm |
| I-Longitudinal adjustment trave ye-index head carrier | 180mm |
| I-spindle nesondo uhambo lokulungisa ubude besondo | 600mm |
| Ububanzi be-engeli ye-taper | 0~ 180 (degree) |
| Ububanzi be-engeli yokukhulula | 0~45 (degree) |
| Ibanga le-engeli elibi | 0~25 (degree) |
| Imoto | 1/3HP 220V/380V 50HZ |
| Ukugaya i-spindle | 5300rpm |
| Isondo lokugaya | Φ100×50×Φ20 |
| Ubukhulu | 55×46×49cm |
| Isisindo | 55KG |
| Izisetshenziswa Ezijwayelekile | 5 amaqoqo: Φ4, Φ 6, Φ 8, Φ 10, Φ 12 |
| Phina Isondo Lokugaya ×1 | |
| Ibhande×1 | |
| Ipeni ledayimane×1 | |
| Isinamathiselo sokugaya i-twist drill×1 | |
| Qeda ukugaya okunamathiselwe kwi-mill×1 | |
| Lathe amathuluzi okugaya okunamathiselwe×1 | |
| Imishini Yokukhetha | Iziqephu eziyishumi nanye: Φ 3, Φ 4, Φ 5, Φ 6, Φ 8, Φ 9, Φ 10, Φ 12, Φ 14, Φ 16, Φ 18 |
Bhala umyalezo wakho lapha futhi usithumelele wona
