I-Manual Metal Lathe Machine CD6240C
Izici
Ibhobo lokuphotha elingaphezu kuka-80mm
I-spindle eyinhloko ibhalansisiwe, futhi isekelwa kumaphoyinti angu-2 nge-taper roller ene-brand ye-Harbin.
Ukubonakala kwangaphandle komshini kufaka amathafa amakhulu, okwenza umshini ubukeke kahle
Izindlela zokulala ezinegebe, okuyi-super-audio frequency hardened (HB450 plus).
Wonke amagiya aqiniswe futhi agaywa umshini wokugaya we-Reishauer.
I-leadscrew kanye ne-feed-rod kuxhumene, kokubili ngokuvikelwa kokulayisha ngokweqile.
Isivalo sokuphakela esizenzakalelayo.
Ukucushwa okuguquguqukayo ngokuphelele ngokuya ngemiyalo:
Uhlelo lwemethrikhi noma intshi;Isondo lesandla sokudla noma kwesokunxele;Isibani se-halogen;Ushintsho olusheshayo;Okuthunyelwe kwethuluzi;I-DRP;I-T-slot compound;Chuck guard;I-leadscrew hood;I-Rapid traverse motor;Ibhuleki le-electromagnetic;Isistimu yokugcoba ngempoqo.
Imininingwane
INDLELA | I-CD6240C | |
AMANDLA | Ubukhulu.shwibeka phezu kombhede mm | 400 |
Ubukhulu.shwiba phezu kwesilayidi esiphambanayo mm | 225 | |
Ubukhulu.shwiba igebe mm | 530 | |
Ibanga elimaphakathi | 1000,1500, 2000mm | |
I-Cross slide travel mm | 330 mm | |
SPINDLE | Imbobo yokuphotha | 80mm |
Ikhala lokuphotha | ISO-C8 noma ISO-D8 | |
I-spindle taper | I-Metric 85mm | |
Izivinini zokuphotha | 24-1600rpm (15 Izinyathelo) | |
I-FEED | Ibanga lochungechunge lwemethrikhi (Izinhlobo) | 0.5-28mm (66Izinhlobo) |
Ibanga lemicu eyiyintshi (Izinhlobo) | 1-56tpi (66 Izinhlobo) | |
Ibanga lochungechunge lwemojuli (Izinhlobo) | 0.5-3.5mm (33 Izinhlobo) | |
Ibanga lemicu ye-diametral (Izinhlobo) | 8-56 DP (33 Izinhlobo) | |
Ibanga lokuphakelayo kobude (izinhlobo) | 0.072-4.038mm/reV (0.0027-0.15inch/rev)(66izinhlobo) | |
Ibanga lokuphakelayo (izinhlobo) | 0.036-2.019mm/reV (0.0013-0.075nch/rev)(66izinhlobo) | |
Isivinini sokuhamba esisheshayo senqola | 5m/min(16.4ft/min) | |
Usayizi we-leadscrew: Iphimbo lobubanzi | 35mm/6mm noma 35mm | |
INKOLO | Uhambo lwama-slide oluphambanayo | 300mm |
Uhambo lokuphumula oluhlanganisiwe | 130 mm | |
Usayizi we-cross-section shank yamathuluzi | 25x25mm | |
I-TAILSTOCK | Ububanzi be-spindle | 65mm |
I-spindle taper | Morse No. 5 | |
Ukuhamba nge-spindle | 120mm | |
Injini eyinhloko | Main drive motor | 4.0kw noma 5.5kw |
Injini yepompo epholile | 0.125kw | |
I-Rapid traverse motor | 0.12kw | |
Isisindo esiphelele/Isisindo esiphelele(kg) | 1000mm | 1640/2290 |
1500mm | 1850/2250 | |
2000mm | 2090/2860 | |
USIZI WOKUPAKA | 1000mm | 2420*1150*1800mm |
1500mm | 2920*1150*1800mm | |
2000mm | 3460*1150*1800mm |