Umshini wokuzilibazisa we-Drill Bit Grinder Sharpener MR-13A

Incazelo emfushane:

1.Ukugaya kunembile futhi kuyashesha, ukusebenza okulula okungenalo ikhono lokugaya.
2.Intengo yezomnotho eyehlisa kakhulu izindleko futhi ithuthukise umphumela wokusetshenziswa.
3.Ngesondo lokugaya idayimane, lingahlonywa ngokuqondile nge-angle enembile kanye nempilo ende yesevisi.


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Izici

1.Ukugaya kunembile futhi kuyashesha, ukusebenza okulula okungenalo ikhono lokugaya.
2.Intengo yezomnotho eyehlisa kakhulu izindleko futhi ithuthukise umphumela wokusetshenziswa.
3.Ngesondo lokugaya idayimane, lingahlonywa ngokuqondile nge-angle enembile kanye nempilo ende yesevisi.
I-4.Imoto ye-DC elawulwa ngogesi futhi enamandla: imvamisa ezinzile, amandla amahhashi aqinile kanye nempilo ende yesevisi.
5.I-Bearing shaft kanye neyunithi yokukhiya.
I-6.Umshini uhlelwe nomsebenzi wokulungisa iphuzu (iphuzu eliphakathi) usayizi, ongaxhuma ngokuphumelelayo nempahla yomgodi wokubhoboza kanye nesivinini sokujikeleza.Ingakwazi ukulawula ukunemba kwekhwalithi futhi yelule impilo yesevisi yebhithi yokubhoboza.

Imininingwane

Imodeli MR-13A
Ibanga Lokugaya Φ2-Φ13(Φ15)
I-Engeli ekhomba 95°(90°)~135°
Amandla I-AC220V
Imoto 120W
Isivinini 4400rpm
Ubukhulu 32*18*19
Isisindo 10kg
Izisetshenziswa Ezijwayelekile Isondo lokugaya :CBN (ye-HSS)×1
Amakholomu ayishumi nanye: Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ9,Φ10,Φ11,Φ12,Φ13
I-Collet chuck:(Φ2-Φ14)×1
Imishini Yokukhetha Isondo lokugaya: SD (yeCarbide)
Amaqoqo: Φ2,Φ2.5,Φ3.5,Φ4.5,Φ5.5,Φ14,Φ15
I-Collet chuck:Φ15

 


  • Okwedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha futhi usithumelele wona