Umshini we-Lathe ovundlile we-C6266A
Izici
1.Indlela yomhlahlandlela kanye nawo wonke amagiya esitokisini sekhanda aqinile futhi aqondile.
I-2.Isistimu yokuphotha inokuqina okuphezulu nokunemba.
I-3.Imishini inesitimela esinamandla se-headstock gear, ukunemba okuphezulu okujikelezayo nokugijima okushelelayo nomsindo ophansi.
4.Idivayisi yokuphepha egcwele kakhulu ihlinzekwe kuphinifa.
5.I-Pedal noma i-electromagnetic braking device.
Isitifiketi sokuhlolwa kwe-6.Ukubekezelelana, ishadi lokugeleza kokuhlola lifakiwe
| IZISEKELO EZIJWAYELEKILE: | IZISEKELO ONGAZITHANDELA |
| 3 umhlathi Shamba kanye nendawo Oisibhamu | 4 i-adaptha yomhlathi we-abd Ukuphumula okuqinile Landela ukuphumula Ipuleti lokushayela Ipuleti lobuso Isibani esisebenzayo Uhlelo lwamabhuleki ezinyawo Isistimu yokupholisa |
Imininingwane
| UHLOBO LWETHULUSI LOMSHINI | I-C6266(A) |
| AMAKHONO | |
| Swing Phezu Kwesilayidi | Φ660 mm |
| Swing Over Cross Slide | Φ440mm |
| Swing ku-Gap Diameter | Φ900mm |
| Ubude be-Gap | 250mm |
| Ukuphakama Kwesikhungo | 330 mm |
| Ibanga Phakathi Kwezikhungo | 1500mm/2000mm/3000mm |
| Ububanzi Bombhede | 400mm |
| Ubukhulu.Ingxenye Yethuluzi | 25mm × 25mm |
| Ubukhulu.Ukuhamba kwe-Cross Slide | 368 mm |
| Ubukhulu.Ukuhamba kweCompound Rest | 230 mm |
| I-HEADstock | |
| Spindle Bore | Φ105mm |
| Ikhala Lokuphotha | D1-8 |
| I-Taper ye-Spindle Bore | Φ113mm(1:20)/MT5 |
| Inombolo yesivinini se-Spindle | 16 |
| Ibanga Lejubane le-Spindle | 25 - 1600 rpm |
| IZIMPASHI KANYE NEMICHA | |
| I-Leadscrew Pitch | Φ40mm×2T.PI noma Φ40mm×12mm |
| I-Inch Threads Range | 7/16～80T.PI (54 izinhlobo) |
| I-Metric Threads Range | 0.45 ~ 120mm (54 izinhlobo) |
| Ibanga le-Diametrical Pitches | 7/8～160DP (izinhlobo ezingama-42) |
| I-Module Pitches Range | 0.25～60MP (izinhlobo ezingama-46) |
| I-Longitudinal Feed Range ku-Metric lead screw | 0.044～1.48mm/rev (25 izinhlobo) |
| I-Longitudinal Feed Range Ku-Intshi Yokuhola Isikulufu | 0.00165"～0.05497"/rev (25 izinhlobo) |
| I-Cross Feeds Range ku-Metric lead screw | 0.022～0.74mm/rev (25 izinhlobo) |
| I-Cross Feed Range ku-Inch lead screw | 0.00083"～0.02774"/rev (25 izinhlobo) |
| I-TAILSTOCK | |
| Khipha ukuhamba | 235 mm |
| Ububanzi be-Quill | Φ90 mm |
| I-Quill taper | MT5 |
| MOTOR | |
| Amandla emoto amakhulu | 7.5kW(10HP) |
| Amandla epompo apholile | 0.09kW (1/8HP) |
| UBUDIMO NEsisindo | |
| Ubukhulu Sebonke (L×W×H) | 321/371/471cm×123cm×160cm |
| Usayizi Wokupakisha (L×W×H) | 324/374/474cm×114cm×184cm |
| Isisindo sengqikithi | 3060/3345/3710kg |
| Isisindo esikhulu | 3535/3835/4310kg |
