Ibhentshi Lathe Machine C0636A
Izici
Indlela yokuqondisa kanye nawo wonke amagiya esitokisini sekhanda aqinile futhi ayisisekelo esinembayo.
Isistimu yokuphotha inokuqina okuphezulu nokunemba.
Imishini inesitimela esinamandla segiya lekhanda, ukunemba okuphezulu okujikelezayo nokugijima okushelelayo nomsindo ophansi.
Idivayisi yokuphepha egcwele kakhulu inikezwe kuphinifa.
I-Pedal noma i-electromagnetic braking device.
Isitifiketi sokuhlola ukubekezelela, ishadi lokugeleza kokuhlola lifakiwe
1. Imibhede eqinile igaywe ngokunemba
2. I-spindle isekelwa isifiso sokunemba kwama-roller bearings
3. Amagiya e-Headstock enziwe ngensimbi yekhwalithi ephezulu, phansi futhi aqinile
4. Igebe elikhiphekayo linikezwa umsebenzi omkhulu wobubanzi
5. Easy operation speed change levers
6. Ibanga lejubane le-spindle 70~2000r/min
7. Imibhede emibili yobude obuhlukene iyatholakala
8. Ibhokisi legiya elilula elisebenzayo linokuphakela okuhlukahlukene kanye nomsebenzi wokusika intambo
9. D1-4 ikhala lokuphotha le-camlock
Imininingwane
| AMAmodeli | C0636A |
| Swayipha phezu kombhede | 360mm(14") |
| Swayipha phezu kwesilayidi esiphambene | 224mm(8-13/16") |
| Swing ngobubanzi begebe | 502mm(19-3/4") |
| Swing ngobude | 210mm(8-1/4") |
| Ubude obumaphakathi | 179mm(7") |
| Ibanga phakathi kwesikhungo | 750mm(30")/1000mm(40") |
| Ububanzi bombhede | 187mm(7-3/8") |
| Ubude bombhede | 1405mm(55-5/16") |
| Ukuphakama kombhede | 290mm(11- 13/32") |
| Spindle bore | 38mm(1-1/2") |
| Ikhala lokuphotha | D1-4" |
| Taper emakhaleni | MT NO.5 |
| I-taper emkhonweni | MT NO.3 |
| Isivinini inombolo | 8 |
| Ibanga lejubane lokuphotha | 70-2000 r/min |
| Ububanzi besilayidi esiphambanayo | 130mm(5-3/32″) |
| Uhambo lwama-slide oluphambanayo | 170mm(6-11/16") |
| Ububanzi bokuphumula obuhlanganisiwe | 80mm(3-1/8″) |
| Uhambo lokuphumula oluhlanganisiwe | 95mm(3-9/16") |
| Ububanzi besikulufu somthofu | 22mm(7/8″) |
| Intambo yesikulufu sokuhola | 8T.PI noma 3mm |
| Ububanzi benduku yokuphakelayo | 19mm(3/4") |
| Ithuluzi lokusika ingxenye enkulu | 16mm×16mm(5/8"×5/8") |
| Ihlanganisa izinkundla ze-imperial | 34 Nos.4-56 TPI |
| Imicu yemethrikhi | 26 Nos.0.4-7 MP |
| I-longitudinal feeds yasebukhosini | 32 Nos.0.002-0.548"/Rev |
| Imethrikhi yokuphakela kwe-longitudinal | 32 Nos.0.052-0.392mm/Rev |
| Cross feeds imperial | 32 Nos.0.007-0.0187"/Rev |
| I-Cross feeds metric | 32 Nos.0.014-0.380mm/Rev |
| Ububanzi be-Quill | 32mm(1-1/4") |
| Khipha ukuhamba | 100mm(3-15/16") |
| I-Quill taper | MT NO.3 |
| Okwemoto eyinhloko | 2HP, 3PH noma 2PH, 1PH |
